Product Description
Fitment Information:
2022
-2024 Subaru WRX
Features:
The Noble RD2 Style Paint Matched Duck Bill Rear Spoiler has been designed with aerodynamics in mind while also providing your VB WRX with an enhanced race look. This style is offered in various paint matched colors for a unique look. No need to find a reputable paint shop to get your new part ready. Just order from us and it will arrive ready to install!
Rear location
Paint matched from the factory
Ships ready to install
Installs to OEM trunk
3M double sided adhesive is included for the installation
Installation
Bolts included are designed to be used with factory STI holes in trunk, if you have OEM spoiler you will need to open the holes up slightly to get the bolts in properly. These bolts are NOT required for install. Be sure to seal bare metal with sealant to prevent rust.
Prep the application area and make sure it is free from dust, debris, wax, and has not been freshly ceramic coated. This spoiler can be installed with just 3M.
The 3M requires installation temperatures of 70-80 degrees. It has a solid bond after 24 hours and will achieve full bond after 72 hours.
Use another person to test fit the spoiler prior to starting the actual install. Note the proper position. Apply 3M to the spoiler and remove the ends of the 3M backing tape. Expose enough so that you can pull it out from under the wing once you put it back on.
Reposition the spoiler in the correct position, double check bolt alignment and start the bolts but do not tighten yet. Remove all of the 3M backing tape. Press down firmly and apply pressure for 30 seconds along each section of the spoiler. Open the trunk, finish tightening the bolts and reassemble the trunk cover.
Usually ships same or next day. 
