Element Max | Barrel Band

Product Description

Product Description:

AEA Element Max Barrel Band

The Black Arts Design AEA Element Max Barrel Band (AKA Barrel Support Stabilizer) is designed to increase POI consistency and eliminate barrel droop instigated by the use of large moderators. In order to provide a tight fit and provide an easy install, we built in 2 large channels to accept TPU (a rubberized plastic) bushings. These bushings give way just enough to permit an easy install while still providing a tight fit, and provide some dampening characteristics. Once snugged down the single M3 screw provides ample holding force to secure the barrel while eliminating barrel droop regardless of the moderator selected. ***Fits all calibers of the Element Max***

 

Material:

Carbon Filled (CF) PETG – CF PETG selected for low shrinkage, resistance to heat, and high dimensional accuracy. The addition of carbon fibers increases flexural modulus (stiffness) well above standard PETG.

TPU (thermoplastic Polyurethane). TPU is extremely flexible and highly resistant to abrasion.

Features:

The shroud section houses two TPU bushings to ensure a snug fit while allowing ease of installation.

TPU has rubber like characteristics adding dampening qualities to our barrel band.

No grub screws! The lower section clamps securely with two alloy steel screws and nuts. Nuts are held captive within internal slots providing a secure hold while maintaining a clean appearance.

Bolstered design along the circumference increases flexural modulus (stiffness) and aesthetic appeal.