Noble OS Style Carbon Fiber Hood Scoop V1 - 2022+ WRX

Product Description

Fitment Information:

2022+ Subaru WRX

Features:

Really stand out from the crowd with our Noble Carbon Fiber OVER SIZED Hood Scoop. Draped in carbon fiber, this larger than OEM hood scoop really demands a presence, providing a more aggressive look from the front. 

Larger than OEM design

Full replacement hood scoop

Carbon fiber topped with gloss clear coat

Ships ready to install

Installation

Removal of the stock piece starts on the underside of the hood, heat shield and intercooler tunnel removal required.  Remove stock scoop, test fit new scoop, clean hood WELL with alcohol where 3M will stick.

A Two (2) person install is HIGHLY recommended.  Peel 3M backing and place scoop onto the hood front edge first to line up properly before laying back edge down onto the hood.  Install at least 3 front edge screws most of the way before lowering the hood and making sure everything is line up properly.  Finish install of the bolts and apply even, firm pressure to the 3M tape for 30-45 seconds to ensure a great bond. 

Do not install in temperatures lower than 75 degrees for best bond.