GrimmSpeed Electronic 3-Port Boost Control Solenoid Kit Subaru WRX 2015-2021 FA20 | 057041

Product Description

Fitment Information:

2015-2021 Subaru WRX

Please note: Will only fit with the factory composite turbo inlet.

Features:

The advantages of a 3-port electronic boost control solenoid (EBCS) vs. the factory 2-port system are readily apparent during the tuning process. The 3-port systems works by interrupting the boost signal traveling from the turbo to the wastegate. That boost is redirected back into the turbo inlet and re-ingested by the turbo using our machined adapter. This is important, as the factory Mass Airflow Sensor has already measured that air and is expecting that your motor will use it during combustion, rather than venting it to the atmosphere. The factory configuration simply 'bleeds' the signal from between the turbo and wastegate, which creates a system that is a bit less complex, but reacts more slowly and with less precision.

The dyno chart above shows two boost plots. The 'before' is our 2015 WRX, dyno tuned by a third party protuner. The 'after' is the exact same tune, but after the installation of the GrimmSpeed 3-Port BCS. As you can see, the addition of the GrimmSpeed BCS shows much tighter boost control and consistency. This is safer for your car and easier for your tuner.

An elegantly engineered solution.

Custom Machined Adapter - Makes use of the factory turbo inlet recirculation port (instead of blocking it off), sealed with a VITON O-Ring

Black Anodized Finish - Protects the assembly from corrosion in an extremely demanding environment

1/4" inch Barbed Fittings – Zinc plated and preassembled with anaerobic sealant; size matches the factory turbo and wastegate hose sizes

3-Port Solenoid - Proprietary internal modifications prepare the solenoid for extreme automotive conditions

Plug-n-Play Wiring Connector - Plugs directly into the OEM wiring harness with no modification required

Compact Design - Mounts directly in factory location with the included adapter and zinc-plated steel bracket

Mounting bracket is laser cut and CNC bent from steel, and zinc plated; comes with stainless press-in nuts

Provides a quicker and more precise boost control response

Arrives fully assembled and ready for the installation

Tuning is required

Installation Guide

What's in the Box:

(1) Fully assembled 3-Port Boost Control Solenoid with Plug-n-Play Connector

(1) 1/4" inch hose, two feet long

Zip ties

All necessary installation hardware