Noble ULTIMATE Pro.3 F1 VA JDM Rear Fog Light Subaru WRX 2015-2021 / STI 2015-2021

Product Description

Pro.3 VA JDM Rear Fog Light

Fitment Information:

2015-2021 Subaru WRX

2015-2021 Subaru STI

Key Features:

Aftermarket styling

Multi function lamp (F1 Brake / Parking / Reverse)

Intelligent F1 Function

Plug and play wiring harness

Includes required installation hardware

Noble's 3rd Pro installment of their F1 multi function lamp is now available. It is the pinnacle of achievement, combining F1 brake, parking, and reverse function into one housing.

Everything you could want in a single lamp is here. This is a huge upgrade from the plastic block off plate that comes in your 15-21 Subaru WRX and STI.

Includes all required hardware and a plug and play harness for easy installation.

Functions

This F1 Rear Fog Lamp has well thought out functions. The F1 function grabs the attention of those behind you especially in emergency braking situations or backing up in a dark area. This version has the capability of blinking for both the brake lamp and reverse lamp.

After the blinking cycle is done (3 seconds), the lamp will remain illuminated solid until the brake is released or you have put the vehicle back in drive / park respectively.

We also realize that some of your time will be spent navigating through traffic. Our intelligent F1 function has a built in delay under these conditions. The brakes have to be released for a full 5 seconds or the lamp will go into a solid illumination and skip the F1 blinking pattern. This prevents a situation in which the lamp would blink blink constantly. In turn your aftermarket accessory will not become a nuisance or distraction to those around you.

NOTE: F1 blinking behavior can be enabled or disabled by user. Instructions included.

Parking light function acts as you would expect, providing additional illumination especially in foggy conditions (low mounted position).

Reverse light adds awareness for others around your vehicle and enhances your view from inside the vehicle.

Installation Video

Remains the same as our Pro 2 due to the plug and play harness.

Installation Notes

Installation is simple with the plug and play harness and included hardware.

Lay out hardware and harness. Install the lamp and find a route for the wiring harness that does not expose the inside of the vehicle to possible water intrusion.

Plug in the harness and test the functions.