Matala 1/2 HP Compressor w/ Manifold MPC-120C

Product Description

1/2 HP Compressor w/Manifold MPC-120C

MPC-120C

This is the 1/2 HP compressor and air filter (MPC-120C) combined with a 3-way heavy duty manifold.

The manifold includes an oil filled pressure gauge to reduce indicator vibration. This gives a more accurate reading of the actual psi of your system. Also attached is a pressure relief valve which opens at approximately 17 psi to prevent damage to the compressor. The gang valves are high-quality brass with 3/8" barbs connectors. A short section of heat resistant hose is included so as to reduce heat to your air hose connection. All high-quality components and very nice design.

This is a stand alone unit without any cabinet which is ready to install in your new or existing aeration system. The Matala Piston Compressor with air manifold is ideal as a replacement compressor for a variety of different manufacturer systems.

Features include:

1/2hp; 115v; 60 Hz

Max amps 3.81 @115V; 433watts

Max pressure 50 feet deep, 17.34 psi

3 way 3/8" manifold valve.

Oil filled pressure gauge

Pressure relief valve

Heat protection hose.

OIl-less non-lube piston and cylinder.

Cylinder hard coated for wear resistance.

Head design allows for easy replacement of piston seal.

Permanently lubricated bearings.

Balanced for smooth low vibration operation.

Safety protected

To help prevent overheating, please follow these recommendations:

only use in water less than 50 feet deep

Use 3/8" air hose length up to 300 ft long; 5/8" hose up to 600 ft long; 1" hose up to 1000 ft long.

use 3 way manifold and 3 hoses