Product Description
Noble King Vortex Generator
Fitment Information
2022-2024 Subaru BRZ
2022-2024 Toyota GR86
Key Features
ABS construction
Paint matched finish
Easy installation
Following the aftermarket tradition of bigger is better, Noble has made a much larger vortex generator for the 22-23 Subaru BRZ and Toyota GR86. It contours the roof and OEM antenna perfectly.
With a paint matched finish and supplied 3M it is ready to install right out of the box. Follow the installation instructions and you'll have another mod crossed off your list.
Installation
Clean and prep the installation area. Make sure it is free from dirt, debris, wax, and that no ceramic coating has been freshly applied. A two person install is recommended.
Install in a warm environment around 70-80 degrees and generally low humidity. Test fit the vortex generator first so you can understand the best spacing on the sides and between the back of the roof / antenna.
Remove product. Install 3M around the outer edge and use any remaining tape for the interior. Peel the edges of the 3M protector up enough so that you can pull it out from under the vortex generator. Place the vortex generator back down, align, and start pulling the 3M. Remove all the of the backing material and press down firmly.
It takes time to develop a full bond. Most of the bonding will happen in the first 24 hours. 100% bond is reached at around 72 hours.
Warranty
1 year warranty against manufacturer defects
Usually ships same or next day. 
