Product Description
Part #: 15WRX-F1-DSST
Special Edition F1 / Rear Fog Light Overlay
These are the most unique products in circulation when it comes to light transmitting tint. Super high quality that will allow you to stick out in a crowd.
Dark Smoke Stealth - dark, but transmits light
Not All Materials are Created Equally
Special Edition Materials
These materials were made in the USA and are not cheap by any stretch of the imagination. We're extra careful in cutting this stuff as any error would be costly for us even! However, it is clear (or smoked) why there is a high cost associated with it. They are quality.
INSTRUCTIONS
Clean your hands and clean the installation area. Keep some soapy water around so you can slide the overlay in place should your alignment be off initially. Use your fingers to push all the water and air out after you find the sweet spot.
NOTE: The water only has to have a small amount of soap in it. You can use it on the lens and the back of the overlay. You can keep a hair dryer or heat gun around to aide in speeding up the drying process. As a general rule of thumb, if the heat is burning you, it may burn the material so use light amounts of heat.
