Product Description
Could this be the one belt to finally rule them all on the CR30?
Enhanced texture for better adhesion
Works with PLA, PETG, CF-PETG, ABS filaments*
Fiber reinforced rubber backed high durability material
Better contrast between parts and belt surface for higher visibility
Thicker belt (1.5mm thick) prevents stretch, stays on belt roller/idled better, better heat soak, allows for higher belt tensions.
Same belt material seen on Ideaformer 3D Belt printers
Minimal seam leaves less marking on parts printed across it
1100 x 230mm sized for the Creality CR30 3D Printmill by Naomi Wu
Blue color cuz blue is rad
*for best adhesion results you will need to calibrate temperature, extrusion speed, and extrusion multiplier for each filament you use. Please note this is an advanced upgrade and if you do not have experience calibrating machines and hardware for your specific needs please do not purchase. This is a consumable product, returns are not accepted on used belts. We are not able to provide support / troubleshooting / configuration assistance at this time
Usually ships same or next day. 
