Noble RD1 Style Front Lip (M6Y - Ceramic White) - 2022+ Subaru WRX

Product Description

Noble RD1 Style Front Lip

Fitment Information:

2022-2025 Subaru WRX

Features:

New from Noble Performance comes our RD1 Style 3 Piece Front Lip.  

This Noble part is easy to install using included the hardware. This lip is constructed out of durable ABS to withstand more impact than your traditional eBay aero pieces.

More aggressive styling

Full ABS Construction

Pre-painted and ready to install

Includes hardware

Installation

Two person install is recommended. Test fit the piece and hold in place with the OEM pop clips on each side. Mark your 3 middle holes through the lip onto the bumper. ( the center hole will like up with a hole already in the bumper) drill the marked holes to 3/8" and install the provided rubber flaring nuts. Reinstall the front lip using the OEM push clips then install the 3 front screws into the rubber nuts (start all 3 before tightening down fully do not over tighten)  Finally while holding the lip tight to the bumper and using the provided self tapping screws through the pre-drilled holes screw the lip to the bumper, being careful not to strip the plastic bumper.